20.12.2022, 09:32
20.12.2022, 09:32
22.12.2022, 10:42
Hello,
I took some measurements but I did not remove the machine from the rack, so you have to take the positions for the screw holes from you machine.
Length: 205 mm
Width: 27 mm
Height at screw positions: 20 mm
The front of the feet exceeds the front of the machine for 10mm
And here is a picture:
Good luck!
I took some measurements but I did not remove the machine from the rack, so you have to take the positions for the screw holes from you machine.
Length: 205 mm
Width: 27 mm
Height at screw positions: 20 mm
The front of the feet exceeds the front of the machine for 10mm
And here is a picture:
Good luck!
23.12.2022, 19:06
25.01.2023, 13:12
Moin,
ich habe nun doch mal die C270 aus dem Rack gezogen und scans der Füße gemacht. Das folgende Bild sollte die Original-Dimensionen zeigen, so es denn auf A4 ausgedruckt wird. Auf Anfrage kann ich auch eine *pdf-Datei schicken, da passt es garantiert - Dateien kann ich hier nämlich, soweit ich sehe, nicht anhängen...
ich habe nun doch mal die C270 aus dem Rack gezogen und scans der Füße gemacht. Das folgende Bild sollte die Original-Dimensionen zeigen, so es denn auf A4 ausgedruckt wird. Auf Anfrage kann ich auch eine *pdf-Datei schicken, da passt es garantiert - Dateien kann ich hier nämlich, soweit ich sehe, nicht anhängen...